Honma BERES Nx Men’s Irons Set | Japanese Crafted Distance & Precision Irons
The Honma BERES Nx Irons are engineered for golfers seeking modern distance, elevated launch, and refined feel, all wrapped in a sleek, contemporary design.
Built with Nx Drive Technology, these irons generate an ideal ball trajectory and powerful distance across multiple impact points—helping golfers achieve consistent performance even on off-center strikes. Featuring advanced materials like tungsten weighting, vibration absorption resin, and an L-Cup face, the BERES Nx irons deliver a rare balance of forgiveness, speed, and premium sound.
Each club is custom built in Sakata, Japan, reflecting Honma’s legendary attention to craftsmanship and performance.
✨ Key Features & Performance Benefits
🚀 Nx Drive Technology – Promotes ideal launch conditions and distance from multiple strike points
⚙️ Tungsten Weighting – Strategically placed low and toward the toe for increased stability
🔊 Vibration Absorption Resin – Enhances feel while boosting overall head rigidity
🎯 Vibration Absorption 3D Emblem – Reduces impact vibration for a forged-like sound and feedback
⬇️ Low CG Design – Encourages high trajectory and long carry, even with stronger lofts
🧱 L-Cup Face Construction – Ultra-thin face design increases repulsive force and ball speed
🪶 Optimized for Distance & Control – Designed for consistent performance throughout the set
🧠 Technology Breakdown
⚙️ Tungsten & Vibration Absorption Resin
A tungsten weight positioned near the toe at the bottom of the cavity works in harmony with vibration-absorbing resin placed behind it. This combination increases head rigidity and maximizes repulsive force, allowing the ball to launch higher and travel farther.
🔊 Vibration Absorption 3D Emblem
The 3D emblem adhered to the back face absorbs unwanted vibrations at impact, delivering a solid, refined feel and sound comparable to forged irons.
⬇️ Low Center of Gravity (CG) Design
A low-and-deep CG paired with a wide sole promotes high launch and distance, even with stronger loft configurations.
🧱 L-Cup Face
The L-Cup structure allows for an extremely thin face while reinforcing clubhead rigidity, improving ball speed and forgiveness across the face.
🪶 Shaft Technology – BERES x VIZARD for Nx
Honma BERES Nx irons come standard with the Honma-exclusive VIZARD for Nx shaft, engineered to maximize initial ball speed and efficiency.
-
More flexible mid-section for smooth energy transfer
-
Optimized butt and tip sections for proper spin and stability
-
Designed to let golfers swing comfortably while the shaft generates speed
📐 BERES Nx Iron Specifications
Iron Numbers:
#5 | #6 | #7 | #8 | #9 | #10 | #11 | AW | SW
Loft (°):
21 | 24 | 27 | 31 | 35 | 40 | 45 | 50 | 55
Lie (°):
61 | 61.5 | 62 | 62.5 | 63 | 63 | 63 | 63 | 64
Offset (mm):
3.5 | 3.5 | 3.0 | 3.0 | 3.0 | 3.0 | 2.5 | 2.5 | 1.5
📦 What’s Included
-
Honma BERES Nx Men’s Irons (Selected Set Configuration)
-
Honma VIZARD for Nx Shafts (Standard)
-
🛡️ Honma Manufacturer Warranty (defects in materials and workmanship)
⚠️ Important Build & Delivery Notice
⚠️ PLEASE NOTE:
All Honma BERES Nx irons are custom built by hand in Sakata, Japan.
⏳ Please allow 4–6 weeks for assembly and delivery due to the handcrafted nature of this premium golf product.
This ensures the highest level of quality, consistency, and performance Honma is renowned for worldwide.
💎 Why Choose Honma BERES Nx Irons
🇯🇵 Authentic Japanese craftsmanship
🎯 Forgiveness with distance-focused engineering
🏌️♂️ Ideal for golfers seeking modern performance with premium feel
⚡ Designed to perform consistently across the entire set
❓ Frequently Asked Questions (FAQs)
Are these irons forged or cast?
The BERES Nx irons utilize advanced construction techniques to deliver forged-like feel with modern distance performance.
Who are these irons best suited for?
Golfers seeking distance, higher launch, and forgiveness with premium feedback.
Do these irons include shafts?
Yes. They come standard with Honma’s VIZARD for Nx shafts.
Are these clubs custom made?
Yes. Each iron is individually assembled in Sakata, Japan.
Original: $250.00
-70%$250.00
$75.00More Images
Honma BERES Nx Men’s Irons Set | Japanese Crafted Distance & Precision Irons
The Honma BERES Nx Irons are engineered for golfers seeking modern distance, elevated launch, and refined feel, all wrapped in a sleek, contemporary design.
Built with Nx Drive Technology, these irons generate an ideal ball trajectory and powerful distance across multiple impact points—helping golfers achieve consistent performance even on off-center strikes. Featuring advanced materials like tungsten weighting, vibration absorption resin, and an L-Cup face, the BERES Nx irons deliver a rare balance of forgiveness, speed, and premium sound.
Each club is custom built in Sakata, Japan, reflecting Honma’s legendary attention to craftsmanship and performance.
✨ Key Features & Performance Benefits
🚀 Nx Drive Technology – Promotes ideal launch conditions and distance from multiple strike points
⚙️ Tungsten Weighting – Strategically placed low and toward the toe for increased stability
🔊 Vibration Absorption Resin – Enhances feel while boosting overall head rigidity
🎯 Vibration Absorption 3D Emblem – Reduces impact vibration for a forged-like sound and feedback
⬇️ Low CG Design – Encourages high trajectory and long carry, even with stronger lofts
🧱 L-Cup Face Construction – Ultra-thin face design increases repulsive force and ball speed
🪶 Optimized for Distance & Control – Designed for consistent performance throughout the set
🧠 Technology Breakdown
⚙️ Tungsten & Vibration Absorption Resin
A tungsten weight positioned near the toe at the bottom of the cavity works in harmony with vibration-absorbing resin placed behind it. This combination increases head rigidity and maximizes repulsive force, allowing the ball to launch higher and travel farther.
🔊 Vibration Absorption 3D Emblem
The 3D emblem adhered to the back face absorbs unwanted vibrations at impact, delivering a solid, refined feel and sound comparable to forged irons.
⬇️ Low Center of Gravity (CG) Design
A low-and-deep CG paired with a wide sole promotes high launch and distance, even with stronger loft configurations.
🧱 L-Cup Face
The L-Cup structure allows for an extremely thin face while reinforcing clubhead rigidity, improving ball speed and forgiveness across the face.
🪶 Shaft Technology – BERES x VIZARD for Nx
Honma BERES Nx irons come standard with the Honma-exclusive VIZARD for Nx shaft, engineered to maximize initial ball speed and efficiency.
-
More flexible mid-section for smooth energy transfer
-
Optimized butt and tip sections for proper spin and stability
-
Designed to let golfers swing comfortably while the shaft generates speed
📐 BERES Nx Iron Specifications
Iron Numbers:
#5 | #6 | #7 | #8 | #9 | #10 | #11 | AW | SW
Loft (°):
21 | 24 | 27 | 31 | 35 | 40 | 45 | 50 | 55
Lie (°):
61 | 61.5 | 62 | 62.5 | 63 | 63 | 63 | 63 | 64
Offset (mm):
3.5 | 3.5 | 3.0 | 3.0 | 3.0 | 3.0 | 2.5 | 2.5 | 1.5
📦 What’s Included
-
Honma BERES Nx Men’s Irons (Selected Set Configuration)
-
Honma VIZARD for Nx Shafts (Standard)
-
🛡️ Honma Manufacturer Warranty (defects in materials and workmanship)
⚠️ Important Build & Delivery Notice
⚠️ PLEASE NOTE:
All Honma BERES Nx irons are custom built by hand in Sakata, Japan.
⏳ Please allow 4–6 weeks for assembly and delivery due to the handcrafted nature of this premium golf product.
This ensures the highest level of quality, consistency, and performance Honma is renowned for worldwide.
💎 Why Choose Honma BERES Nx Irons
🇯🇵 Authentic Japanese craftsmanship
🎯 Forgiveness with distance-focused engineering
🏌️♂️ Ideal for golfers seeking modern performance with premium feel
⚡ Designed to perform consistently across the entire set
❓ Frequently Asked Questions (FAQs)
Are these irons forged or cast?
The BERES Nx irons utilize advanced construction techniques to deliver forged-like feel with modern distance performance.
Who are these irons best suited for?
Golfers seeking distance, higher launch, and forgiveness with premium feedback.
Do these irons include shafts?
Yes. They come standard with Honma’s VIZARD for Nx shafts.
Are these clubs custom made?
Yes. Each iron is individually assembled in Sakata, Japan.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Honma BERES Nx Irons are engineered for golfers seeking modern distance, elevated launch, and refined feel, all wrapped in a sleek, contemporary design.
Built with Nx Drive Technology, these irons generate an ideal ball trajectory and powerful distance across multiple impact points—helping golfers achieve consistent performance even on off-center strikes. Featuring advanced materials like tungsten weighting, vibration absorption resin, and an L-Cup face, the BERES Nx irons deliver a rare balance of forgiveness, speed, and premium sound.
Each club is custom built in Sakata, Japan, reflecting Honma’s legendary attention to craftsmanship and performance.
✨ Key Features & Performance Benefits
🚀 Nx Drive Technology – Promotes ideal launch conditions and distance from multiple strike points
⚙️ Tungsten Weighting – Strategically placed low and toward the toe for increased stability
🔊 Vibration Absorption Resin – Enhances feel while boosting overall head rigidity
🎯 Vibration Absorption 3D Emblem – Reduces impact vibration for a forged-like sound and feedback
⬇️ Low CG Design – Encourages high trajectory and long carry, even with stronger lofts
🧱 L-Cup Face Construction – Ultra-thin face design increases repulsive force and ball speed
🪶 Optimized for Distance & Control – Designed for consistent performance throughout the set
🧠 Technology Breakdown
⚙️ Tungsten & Vibration Absorption Resin
A tungsten weight positioned near the toe at the bottom of the cavity works in harmony with vibration-absorbing resin placed behind it. This combination increases head rigidity and maximizes repulsive force, allowing the ball to launch higher and travel farther.
🔊 Vibration Absorption 3D Emblem
The 3D emblem adhered to the back face absorbs unwanted vibrations at impact, delivering a solid, refined feel and sound comparable to forged irons.
⬇️ Low Center of Gravity (CG) Design
A low-and-deep CG paired with a wide sole promotes high launch and distance, even with stronger loft configurations.
🧱 L-Cup Face
The L-Cup structure allows for an extremely thin face while reinforcing clubhead rigidity, improving ball speed and forgiveness across the face.
🪶 Shaft Technology – BERES x VIZARD for Nx
Honma BERES Nx irons come standard with the Honma-exclusive VIZARD for Nx shaft, engineered to maximize initial ball speed and efficiency.
-
More flexible mid-section for smooth energy transfer
-
Optimized butt and tip sections for proper spin and stability
-
Designed to let golfers swing comfortably while the shaft generates speed
📐 BERES Nx Iron Specifications
Iron Numbers:
#5 | #6 | #7 | #8 | #9 | #10 | #11 | AW | SW
Loft (°):
21 | 24 | 27 | 31 | 35 | 40 | 45 | 50 | 55
Lie (°):
61 | 61.5 | 62 | 62.5 | 63 | 63 | 63 | 63 | 64
Offset (mm):
3.5 | 3.5 | 3.0 | 3.0 | 3.0 | 3.0 | 2.5 | 2.5 | 1.5
📦 What’s Included
-
Honma BERES Nx Men’s Irons (Selected Set Configuration)
-
Honma VIZARD for Nx Shafts (Standard)
-
🛡️ Honma Manufacturer Warranty (defects in materials and workmanship)
⚠️ Important Build & Delivery Notice
⚠️ PLEASE NOTE:
All Honma BERES Nx irons are custom built by hand in Sakata, Japan.
⏳ Please allow 4–6 weeks for assembly and delivery due to the handcrafted nature of this premium golf product.
This ensures the highest level of quality, consistency, and performance Honma is renowned for worldwide.
💎 Why Choose Honma BERES Nx Irons
🇯🇵 Authentic Japanese craftsmanship
🎯 Forgiveness with distance-focused engineering
🏌️♂️ Ideal for golfers seeking modern performance with premium feel
⚡ Designed to perform consistently across the entire set
❓ Frequently Asked Questions (FAQs)
Are these irons forged or cast?
The BERES Nx irons utilize advanced construction techniques to deliver forged-like feel with modern distance performance.
Who are these irons best suited for?
Golfers seeking distance, higher launch, and forgiveness with premium feedback.
Do these irons include shafts?
Yes. They come standard with Honma’s VIZARD for Nx shafts.
Are these clubs custom made?
Yes. Each iron is individually assembled in Sakata, Japan.
